Compact size car class and Full Size Car class
Demo cars entry
fee: $40 includes car, driver, and 2 pit
crew. Additional crew at $20 each –
registration stops at
Concessions will be
available on the fairgrounds
GATE FEE: $5 for adults, $3 5-12 years old, preschoolers FREE
admission.
RULES
AND REGULATIONS * DRIVERS MUST BE 18 OR OLDER
1.
Regular passenger
cars and station wagons only (NO convertibles, Imperials,
2.
Cars must have
bumper height of not more than 28 inches.
Compact cars judged by manufactures designated
body size with 104” wheel base.
3.
Pre-demoed cars
are allowed.
4.
All cars WILL BE
INSPECTED before the demo.
5.
All glass and
chrome must be removed before entering fairgrounds or the car will be
disqualified.
6.
Doors must be
chained, wired or can be welded shut (no grader blades).
7.
All drivers MUST
wear helmets and seat belts with shoulder harnesses.
8.
Frame must be
stock: may notch, no bracing, no
reinforcing or cutting in any way. Body
mounts cannot be modified.
9.
Full interior
must be removed. Deck lids and
9-passenger seat removed on all wagons.
10.
No reinforcing,
welding, or bracing of the body but doors can be welded shut.
11.
Dash bar is
allowed: no larger than 3 inches in diameter with end plates no longer than 12
inches by 6 inches.
12.
BEHIND THE SEAT
BAR IS MANDATORY: no larger than 4
inches in diameter with end plates no larger than 12” by 6 “.
13.
No reinforcing of
the front end (this includes kickers to the frame or firewall from radiator
support).
14.
Fenders can be
cut for clearance.
15.
Firewall may be
cut for distributor room. Any hole in the
firewall larger than 12 inches MUST be covered.
16.
Gas tank and
battery box must be mounted and covered in the interior of the car (old gas
tank must be removed).
17.
Stock suspension
only (standard height with no spacers, stops, blocks or reversed spring shackles
used to raise or lower.)
18.
Fire holes must
be cut in the hood (not above the air cleaner).
19.
Hood hold-downs
can be no larger than ¾ inch. No more
than 6 hood hold-downs not including hinges and 4 in the trunk.
Cannot run your all thread all the way through
the frame up to your hood or trunk lid.
Trunk must be empty.
20.
May cut hole in
floor for gear shifter.
21.
If you wish to
weld the stock bumper to the stock frame, this is acceptable. You may also weld the shocks on the bumper.
Chained bumpers are also permitted. Two single wrapped chains for support only –
no trailer hitches.
22.
Radiator must be
stock in stock position. No extra
radiators or tanks allowed. No extra
bracing, but may be tied in.
23.
Transmission
cooler allowed and must be mounted inside the car. Cooler lines must be encased inside other
protective line.
24.
Engines must be
in original position. Engine can be
chained or welded in. Any part of the
engine can be modified.
25.
Tires: No solid, airplane, tractor or skid loader
tires allowed. No stem protectors. No stuffed or tires inside of tires allowed.
No tires larger than 15 inches. Tire skirts are allowed.
26.
No cross wiring
of back windows in station wagons.
27.
No reinforcing or
repair of front or hear hump.
28.
Windshield rods
welded from firewall to windshield frame are allowed for driver safety.
NO ALCOHOL IN THE PITS!
Feature Payout